04
апр
Contents.1 IntroductionThe Source is the main folder on your hard drive which contains your collection of Movies or TV Shows or Music Videos or Music. These four classes of media cannot be mixed in the one Source. Once the Sources are set up, Kodi can perform the appropriate actions to display your media.
Install Plexus Addon On Kodi 17.3 & 17.4 Krypton-2017-plexus kodi. Here enter that kodi plexus repository url and also enter the media source name. Apa beli kirim aja nama toko n alamat klo mau yg asli beli aja situs resminya masih aktif. Buat anda yang masih bingung mencari situs yang membagikan playlist m3u kodi, berikut situs-situs yang biasa saya kunjungi untuk mencari playlist m3u adalah ini. Update m3u list 7 November 2015. Untuk saat ini saya memakai m3u list live tv sbb: M3u list yang disimpan di internet (remote path), lumayan bagus, selalu diupdate,bisa didownload.
There is no limit to the number of Sources that can be added to Kodi for each media class.This step of the guide will enable you to complete the following actions:. Adding Sources - Add the Source folder to Kodi. Set Media Type - Advise Kodi what type of media is in the Source. Scraper Settings - Advise Kodi which Information Provider (Scraper) to use and adjust the settings to your preferences. Add to Library - Scrape (import) the media into the libraryEach section is a direct continuation of the previous section, and only separated for clarity. Although the page looks complex, it is not. It is possible to perform the steps on this page in less than one minute once familiar with the process.If you have come directly to this page without following the guide and are unsure of how to set up your Sources on your computer/NAS, skip back to Naming Video Files at the start of the guide.does not work with the library features of Kodi (scanning data in like summaries and movie covers).
It is recommended that you share your media using another protocol such as SMB2 Scraper and SettingsThe default scraper used by Kodi for TV Shows is the TheMovieDB-TV Shows. Other scrapers are available and can be found by searching the Kodi site See: See:Check the settings of the scraper are configured to your preference. The default settings are usually good enough, but you may have different preferences or needs.When checking settings, ensure you access the scraper settings from the of the TV Show Source. Accessing it through the add-ons menu only adjusts the default settings, and won't adjust settings on the currently active sources.Note:.
TVDB was the default Kodi scraper until 19 November 2018 when the scraper changed to the current TheMovieDB-TV Shows scraper. Due to a lack of communication from the TVDB, the high level of complaints on their forum, and the sudden changes to their API, it was deemed necessary to change provider to ensure a more stable user experience. Enable the setting in Settings Media Videos. This will make it easier to find tv shows in your library that failed the scraping process.3 Adding Sources. Keep original title Use the original (untranslated) title when downloading info for a foreign film. For example the movie is the English translated title of the movie.
The Original Name of the movie is 卧虎藏龙. If you prefer the English translated title, then disable the setting. If you prefer the original Chinese title then enable the setting. Enable fanart Enable this setting to download.
Enable trailer (YouTube) Downloads the link to a movie trailer at. If you have local trailers, ensure this setting is disabled. Preferred language Language to use for summaries and other metadata. Preferred Certification Country Country/Nation preference for Content Advisory Ratings- eg M, MA, PG Default Rating from Choose site to download movie ratings from.
Choices are TMDB and IMDB. If IMDB is selected, it becomes the default rating. TheMovieDB rating is still scraped. Add also IMDB ratings Only visible if the previous setting is set to TMDB. Allows scraping of ratings from both sources, but keeps TheMovieDB rating as the default rating.Press OK to accept the changes. The screen in Step 10 will be offered4.2 TV Show Scraper. Keep original title Use the original (untranslated) title when downloading info for a TV Show For example the movie is the English translated title of the movie.
The Original Name of the movie is 卧虎藏龙. If you want the English translated title, then disable the setting.
If you want the original Chinese title then enable the setting. Get Artwork from themoviedb.org Enable this setting to download Poster, Fanart and episode Thumbs Get Extra Artwork from fanart.tv Enable this setting to download other types such as Banner, Clearart, Clearlogo, Discart, Landscape for the TV Show and Seasons Preferred language Language to use for summaries and other metadata.Press OK to accept the changes. The screen in Step 10 will be offered5 Add to Library. Step 10: Press Yes to scrape the content to the library(if No is pressed, it can be scanned later via the Source Context Menu).Once you press Yes, Kodi will scan your library and attempt to match each title in your library to the title at the site of the Information Provider. If a match is found, the metadata and artwork is downloaded and used for the library display. Depending upon the size of your library, this could take some time. A single movie could take approx 30 seconds, a library of 400 movies could take over an hour.When the scraping process is complete, be sure to check the to view any titles that were not added to the library, which is normally due to incorrect naming.
See.At this point, you should now have a fully functioning video library. You might notice that Kodi has an 'ADD' button in addition to a 'BROWSE' button when you are adding a source. After you add your first location, you can add a second location (network or local. You can even mix them) and Kodi will show both folders as a single folder/source.Kodi will also combine the subfolders within the source/locations. For example, if you had a hard drive for TV shows, but ran out of space, you could make a second hard drive with the same folder paths and Kodi would merge them together to a single directory path.
Such asHard drive 1/TV shows/ Hard drive 2/TV shows/and the same is true for an additional nested folder with the same way:Hard drive 1/TV shows/American Dad/ Hard drive 2/TV shows/American Dad/You could have half of a show on one hard drive, half on another, and Kodi will show it to you as if it was in a single location by using multiple locations in a single source.Note: This only impacts the basic 'Files view'. The default Library nodes will combine things by show even if their files are spread across multiple drives. Most users will not really benefit from using multiple paths in a single source.8 Password protected sources See:9 References.
| Steps to create your Video Library |
|---|
| 1. Video Guide Main Page |
| Prepare the Files |
2. Naming & Folder Structure
|
| Creating the Library |
| 3. Add Sources & Scrape |
| 4. Scraping Problems |
| Modify your Library |
| 5. Update Video Library |
| 6. Library Management |
7. Artwork
|
8. NFO Files
|
| Safeguard & Rebuild |
| 9. Import-Export Library |
| 10. Backup |
| Video library | Adding video sources |
- 4Set Content
The Source is the main folder on your hard drive which contains your collection of Movies or TV Shows or Music Videos or Music. These four classes of media cannot be mixed in the one Source. Once the Sources are set up, Kodi can perform the appropriate actions to display your media. There is no limit to the number of Sources that can be added to Kodi for each media class.
This step of the guide will enable you to complete the following actions:
- Adding Sources - Add the Source folder to Kodi
- Set Media Type - Advise Kodi what type of media is in the Source
- Scraper Settings - Advise Kodi which Information Provider (Scraper) to use and adjust the settings to your preferences
- Add to Library - Scrape (import) the media into the library
Each section is a direct continuation of the previous section, and only separated for clarity. Although the page looks complex, it is not. It is possible to perform the steps on this page in less than one minute once familiar with the process.
If you have come directly to this page without following the guide and are unsure of how to set up your Sources on your computer/NAS, skip back to Naming Video Files at the start of the guide.
UPnP does not work with the library features of Kodi (scanning data in like summaries and movie covers). It is recommended that you share your media using another protocol such as SMB
The default scraper used by Kodi for TV Shows is the TheMovieDB-TV Shows. Other scrapers are available and can be found by searching the Kodi site here
- See: TheMovieDB
- See: TheMovieDB Add-on
Check the settings of the scraper are configured to your preference. The default settings are usually good enough, but you may have different preferences or needs.
When checking settings, ensure you access the scraper settings from the Context Menu of the TV Show Source. Accessing it through the add-ons menu only adjusts the default settings, and won't adjust settings on the currently active sources.
Note:
- TVDB was the default Kodi scraper until 19 November 2018 when the scraper changed to the current TheMovieDB-TV Shows scraper [1]. Due to a lack of communication from the TVDB, the high level of complaints on their forum, and the sudden changes to their API, it was deemed necessary to change provider to ensure a more stable user experience.
- Enable the setting Show empty TV shows in Settings > Media > Videos. This will make it easier to find tv shows in your library that failed the scraping process.
Step 1: Select VIDEOS in the home screen menu.
(Or select Enter files section if that button is visible)Step 2: Select FILES
Step 3: Select ADD VIDEOS...
Step 4: Select the BROWSE button from the ADD VIDEO SOURCE window.
Step 5: Browse to locate your Source folder and Enter that folder. Select OK
Note: Network browsing is no longer possible with Samba v2 and upwards. Samba v1 was deprecated May 2018. To add Network Sources, see Section 6- Adding Remote Sources belowStep 6: Either use the default name or rename the Source. The name doesn't matter to Kodi, but keep the names unique for ease of maintenance. Then select OK.
Step 7: The set content window will display. This is where the media type is set.
Select the option This directory contains.Step 8: Select the type of media that is in the Source.
The left image is the Set Content screen for Movies. The right image is the Set Content screen for TV Shows. Continue these steps using the appropriate one, not both.
Step 9a:The Movie Database for movies is the default scraper and is automatically selected.
* Select Choose information provider to install another scraper if required
* For the Scraper Settings, see the next section Movie Scraper
* For the remaining settings see Movies- Content scanning options belowStep 9b:The Movie Database for TV Shows is the default scraper and is automatically selected.
* Select Choose information provider to install another scraper if required
* For the Scraper Settings, see the next section TV Show Scraper
* For the remaining settings see TV Show- Content scanning options below
- If Enabled Kodi will use the folder name to scrape the movie
- Kodi will load NFO files from NFO files named movie.nfo, but will fallback to <videofilename>.nfo as required
- Kodi will load artwork files using the short format <artworktype>.jpg/png filenames, but will fallback to the longer <NameOfVideoFile>-<artworktype>.jpg/png format as required.
- If Disabled Kodi will use the filename to scrape the movie
- NFO files must be named the long format <MovieFileName>.nfo filename.
- Artwork files must be named using the long format <NameOfVideoFile>-<artworktype>.jpg/png filenames.
- Scan Recursively
- Used for deep folder structures such as when additional Genre or Movie Set folders are used. Will allow the video scanner to search deeper to find the playable file
- Selected folder contains a single video
- Normally greyed out unless you have selected a single movie folder within an existing source. Disabled when a Source is selected. Becomes Enabled when a Movie folder is selected.
- Exclude path from library updates
- Prevents the Source from being scanned when an Update Library is running. When Enabled it will speed up the Update Library process in large libraries if the Source no longer has content added to it.
- TV Show- Content scanning options
- Selected folder contains a single TV show
- Allows you to change the Content settings for a particular TV Show without affecting the entire Source. Disabled when a Source is selected. Becomes Enabled when a TV Show folder is selected.
- Exclude path from library updates
- Prevents the Source from being scanned when an Update Library is running. When Enabled it will speed up the Update Library process in large libraries if the Source no longer has content added to it.
Alternate scrapers are available, and can be installed using the Get More button from the Choose information provider option shown in Step 9. Only change the default scraper if you have a particular reason to.
How To Disable Udp Checksum Offload In Windows Vista. The TargetOSOptimizer tool reconfigures various Windows functions to optimize the performance. Disabling 'Large Send Offload (LSO)' Large Send Offload is a technique of improving network performance while at the same time reducing CPU overhead. Disabling checksum offload will also disable other stateless offloading including Receive Side Scaling (RSS), Receive Segment Coalescing (RSC) and Large Send Offload (LSO). Example 1: Disable TCP/IPv6 checksum offload on all network adapters then restart them. PS C: Disable-NetAdapterChecksumOffload -Name '.' -TcpIPv6. Disable udp checksum offload windows vista. Name it DisabledComponents with a value of 1 This will disable all IPv6 components. Also uncheck the Ipv6 on the wireless adapter properties within the ncpa.cpl. As per your advice, i have tried to create DisabledComponents, but it didnt disable. TCP Checksum Offload (IPv6) UDP Checksum Offload (IPv6) Large Send Offload v2 (IPv6).
4.1 Movie Scraper
From Step 9a above select Settings to access the settings page for the scraper
- Keep original title
- Use the original (untranslated) title when downloading info for a foreign film.
- For example the movie Crouching Tiger, Hidden Dragon (2000) is the English translated title of the movie. The Original Name of the movie is 卧虎藏龙. If you prefer the English translated title, then disable the setting. If you prefer the original Chinese title then enable the setting.
- Enable fanart
- Enable this setting to download Fanart.
- Enable trailer (YouTube)
- Downloads the link to a movie trailer at YouTube. If you have local trailers, ensure this setting is disabled.
- Preferred language
- Language to use for summaries and other metadata.
- Preferred Certification Country
- Country/Nation preference for Content Advisory Ratings- eg M, MA, PG
- Default Rating from
- Choose site to download movie ratings from. Choices are TMDB and IMDB. If IMDB is selected, it becomes the default rating. TheMovieDB rating is still scraped.
- Add also IMDB ratings
- Only visible if the previous setting is set to TMDB. Allows scraping of ratings from both sources, but keeps TheMovieDB rating as the default rating.
Press OK to accept the changes. The screen in Step 10 will be offered
4.2 TV Show Scraper
From Step 9b above select Settings to access the settings page for the scraper
- Keep original title
- Use the original (untranslated) title when downloading info for a TV Show
- For example the movie Crouching Tiger, Hidden Dragon (2000) is the English translated title of the movie. The Original Name of the movie is 卧虎藏龙. If you want the English translated title, then disable the setting. If you want the original Chinese title then enable the setting.
- Get Artwork from themoviedb.org
- Enable this setting to download Poster, Fanart and episode Thumbs Artwork
- Get Extra Artwork from fanart.tv
- Enable this setting to download other Artwork types such as Banner, Clearart, Clearlogo, Discart, Landscape for the TV Show and Seasons
- Preferred language
- Language to use for summaries and other metadata.
Press OK to accept the changes. The screen in Step 10 will be offered
Step 10: Press Yes to scrape the content to the library
(if No is pressed, it can be scanned later via the Source Context Menu).
Once you press Yes, Kodi will scan your library and attempt to match each title in your library to the title at the site of the Information Provider. If a match is found, the metadata and artwork is downloaded and used for the library display. Depending upon the size of your library, this could take some time. A single movie could take approx 30 seconds, a library of 400 movies could take over an hour.
When the scraping process is complete, be sure to check the Event Log to view any titles that were not added to the library, which is normally due to incorrect naming. See.. Scraping Problems
| Return to top |
|---|
For details on the supported protocols and configuration
- See: File sharing
Follow the steps (above) for adding a source, but when you get to the 'browse' section (step 4 & 5), you need to do one of the following:
If your remote device is visible from one of the existing choices (e.g 'Network File system' , 'UPnP Devices' etc)
- Select a remote location, and you should be able to browse to the remote server.
If the device is not visible, or
- It is a remote NAS
- It is an SMB server
You will need to add a new network location:
Image 1- Select Add network location.. from the Browse for new shares' list.
Image 2- In the new window select the correct Protocol for your Network Share, then select Server Name.
Image 3- Type in either the IP Address or the Device name of your server.
Note: if you use a dynamic IP for your NAS you could lose access to your shares if the IP changes. It is recommended that you use a static IP if adding your share this way.Image 4-
4.1 In the Shared folder section, type in the name of the folder you wish to add. You will be required to add the drive letter eg f/Movies.
4.2 If your share requires a Username and Password enter them in the appropriate sections.
4.4 Select OK and your share should appear in the Browse for new share list shown in image 1
You might notice that Kodi has an 'ADD' button in addition to a 'BROWSE' button when you are adding a source. After you add your first location, you can add a second location (network or local. you can even mix them) and Kodi will show both folders as a single folder/source.
Kodi will also combine the subfolders within the source/locations. For example, if you had a hard drive for TV shows, but ran out of space, you could make a second hard drive with the same folder paths and Kodi would merge them together to a single directory path. Such as
Hard drive 1/TV shows/Hard drive 2/TV shows/
and the same is true for an additional nested folder with the same way:
Hard drive 1/TV shows/American Dad/Hard drive 2/TV shows/American Dad/
You could have half of a show on one hard drive, half on another, and Kodi will show it to you as if it was in a single location by using multiple locations in a single source.
Note: This only impacts the basic 'Files view'. The default Library nodes will combine things by show even if their files are spread across multiple drives. Most users will not really benefit from using multiple paths in a single source.
Photosweeper windows.
- See: Media sources#Locking
- ↑https://github.com/xbmc/xbmc/pull/14898
| Return to top |
|---|
Retrieved from 'https://kodi.wiki/index.php?title=Adding_video_sources&oldid=164483'
Contents.1 IntroductionThe Source is the main folder on your hard drive which contains your collection of Movies or TV Shows or Music Videos or Music. These four classes of media cannot be mixed in the one Source. Once the Sources are set up, Kodi can perform the appropriate actions to display your media.
Install Plexus Addon On Kodi 17.3 & 17.4 Krypton-2017-plexus kodi. Here enter that kodi plexus repository url and also enter the media source name. Apa beli kirim aja nama toko n alamat klo mau yg asli beli aja situs resminya masih aktif. Buat anda yang masih bingung mencari situs yang membagikan playlist m3u kodi, berikut situs-situs yang biasa saya kunjungi untuk mencari playlist m3u adalah ini. Update m3u list 7 November 2015. Untuk saat ini saya memakai m3u list live tv sbb: M3u list yang disimpan di internet (remote path), lumayan bagus, selalu diupdate,bisa didownload.
There is no limit to the number of Sources that can be added to Kodi for each media class.This step of the guide will enable you to complete the following actions:. Adding Sources - Add the Source folder to Kodi. Set Media Type - Advise Kodi what type of media is in the Source. Scraper Settings - Advise Kodi which Information Provider (Scraper) to use and adjust the settings to your preferences. Add to Library - Scrape (import) the media into the libraryEach section is a direct continuation of the previous section, and only separated for clarity. Although the page looks complex, it is not. It is possible to perform the steps on this page in less than one minute once familiar with the process.If you have come directly to this page without following the guide and are unsure of how to set up your Sources on your computer/NAS, skip back to Naming Video Files at the start of the guide.does not work with the library features of Kodi (scanning data in like summaries and movie covers).
It is recommended that you share your media using another protocol such as SMB2 Scraper and SettingsThe default scraper used by Kodi for TV Shows is the TheMovieDB-TV Shows. Other scrapers are available and can be found by searching the Kodi site See: See:Check the settings of the scraper are configured to your preference. The default settings are usually good enough, but you may have different preferences or needs.When checking settings, ensure you access the scraper settings from the of the TV Show Source. Accessing it through the add-ons menu only adjusts the default settings, and won\'t adjust settings on the currently active sources.Note:.
TVDB was the default Kodi scraper until 19 November 2018 when the scraper changed to the current TheMovieDB-TV Shows scraper. Due to a lack of communication from the TVDB, the high level of complaints on their forum, and the sudden changes to their API, it was deemed necessary to change provider to ensure a more stable user experience. Enable the setting in Settings Media Videos. This will make it easier to find tv shows in your library that failed the scraping process.3 Adding Sources. Keep original title Use the original (untranslated) title when downloading info for a foreign film. For example the movie is the English translated title of the movie.
The Original Name of the movie is 卧虎藏龙. If you prefer the English translated title, then disable the setting. If you prefer the original Chinese title then enable the setting. Enable fanart Enable this setting to download.
Enable trailer (YouTube) Downloads the link to a movie trailer at. If you have local trailers, ensure this setting is disabled. Preferred language Language to use for summaries and other metadata. Preferred Certification Country Country/Nation preference for Content Advisory Ratings- eg M, MA, PG Default Rating from Choose site to download movie ratings from.
Choices are TMDB and IMDB. If IMDB is selected, it becomes the default rating. TheMovieDB rating is still scraped. Add also IMDB ratings Only visible if the previous setting is set to TMDB. Allows scraping of ratings from both sources, but keeps TheMovieDB rating as the default rating.Press OK to accept the changes. The screen in Step 10 will be offered4.2 TV Show Scraper. Keep original title Use the original (untranslated) title when downloading info for a TV Show For example the movie is the English translated title of the movie.
The Original Name of the movie is 卧虎藏龙. If you want the English translated title, then disable the setting.
If you want the original Chinese title then enable the setting. Get Artwork from themoviedb.org Enable this setting to download Poster, Fanart and episode Thumbs Get Extra Artwork from fanart.tv Enable this setting to download other types such as Banner, Clearart, Clearlogo, Discart, Landscape for the TV Show and Seasons Preferred language Language to use for summaries and other metadata.Press OK to accept the changes. The screen in Step 10 will be offered5 Add to Library. Step 10: Press Yes to scrape the content to the library(if No is pressed, it can be scanned later via the Source Context Menu).Once you press Yes, Kodi will scan your library and attempt to match each title in your library to the title at the site of the Information Provider. If a match is found, the metadata and artwork is downloaded and used for the library display. Depending upon the size of your library, this could take some time. A single movie could take approx 30 seconds, a library of 400 movies could take over an hour.When the scraping process is complete, be sure to check the to view any titles that were not added to the library, which is normally due to incorrect naming.
See.At this point, you should now have a fully functioning video library. You might notice that Kodi has an \'ADD\' button in addition to a \'BROWSE\' button when you are adding a source. After you add your first location, you can add a second location (network or local. You can even mix them) and Kodi will show both folders as a single folder/source.Kodi will also combine the subfolders within the source/locations. For example, if you had a hard drive for TV shows, but ran out of space, you could make a second hard drive with the same folder paths and Kodi would merge them together to a single directory path.
Such asHard drive 1/TV shows/ Hard drive 2/TV shows/and the same is true for an additional nested folder with the same way:Hard drive 1/TV shows/American Dad/ Hard drive 2/TV shows/American Dad/You could have half of a show on one hard drive, half on another, and Kodi will show it to you as if it was in a single location by using multiple locations in a single source.Note: This only impacts the basic \'Files view\'. The default Library nodes will combine things by show even if their files are spread across multiple drives. Most users will not really benefit from using multiple paths in a single source.8 Password protected sources See:9 References.
| Steps to create your Video Library |
|---|
| 1. Video Guide Main Page |
| Prepare the Files |
2. Naming & Folder Structure
|
| Creating the Library |
| 3. Add Sources & Scrape |
| 4. Scraping Problems |
| Modify your Library |
| 5. Update Video Library |
| 6. Library Management |
7. Artwork
|
8. NFO Files
|
| Safeguard & Rebuild |
| 9. Import-Export Library |
| 10. Backup |
| Video library | Adding video sources |
- 4Set Content
The Source is the main folder on your hard drive which contains your collection of Movies or TV Shows or Music Videos or Music. These four classes of media cannot be mixed in the one Source. Once the Sources are set up, Kodi can perform the appropriate actions to display your media. There is no limit to the number of Sources that can be added to Kodi for each media class.
This step of the guide will enable you to complete the following actions:
- Adding Sources - Add the Source folder to Kodi
- Set Media Type - Advise Kodi what type of media is in the Source
- Scraper Settings - Advise Kodi which Information Provider (Scraper) to use and adjust the settings to your preferences
- Add to Library - Scrape (import) the media into the library
Each section is a direct continuation of the previous section, and only separated for clarity. Although the page looks complex, it is not. It is possible to perform the steps on this page in less than one minute once familiar with the process.
If you have come directly to this page without following the guide and are unsure of how to set up your Sources on your computer/NAS, skip back to Naming Video Files at the start of the guide.
UPnP does not work with the library features of Kodi (scanning data in like summaries and movie covers). It is recommended that you share your media using another protocol such as SMB
The default scraper used by Kodi for TV Shows is the TheMovieDB-TV Shows. Other scrapers are available and can be found by searching the Kodi site here
- See: TheMovieDB
- See: TheMovieDB Add-on
Check the settings of the scraper are configured to your preference. The default settings are usually good enough, but you may have different preferences or needs.
When checking settings, ensure you access the scraper settings from the Context Menu of the TV Show Source. Accessing it through the add-ons menu only adjusts the default settings, and won\'t adjust settings on the currently active sources.
Note:
- TVDB was the default Kodi scraper until 19 November 2018 when the scraper changed to the current TheMovieDB-TV Shows scraper [1]. Due to a lack of communication from the TVDB, the high level of complaints on their forum, and the sudden changes to their API, it was deemed necessary to change provider to ensure a more stable user experience.
- Enable the setting Show empty TV shows in Settings > Media > Videos. This will make it easier to find tv shows in your library that failed the scraping process.
Step 1: Select VIDEOS in the home screen menu.
(Or select Enter files section if that button is visible)Step 2: Select FILES
Step 3: Select ADD VIDEOS...
Step 4: Select the BROWSE button from the ADD VIDEO SOURCE window.
Step 5: Browse to locate your Source folder and Enter that folder. Select OK
Note: Network browsing is no longer possible with Samba v2 and upwards. Samba v1 was deprecated May 2018. To add Network Sources, see Section 6- Adding Remote Sources belowStep 6: Either use the default name or rename the Source. The name doesn\'t matter to Kodi, but keep the names unique for ease of maintenance. Then select OK.
Step 7: The set content window will display. This is where the media type is set.
Select the option This directory contains.Step 8: Select the type of media that is in the Source.
The left image is the Set Content screen for Movies. The right image is the Set Content screen for TV Shows. Continue these steps using the appropriate one, not both.
Step 9a:The Movie Database for movies is the default scraper and is automatically selected.
* Select Choose information provider to install another scraper if required
* For the Scraper Settings, see the next section Movie Scraper
* For the remaining settings see Movies- Content scanning options belowStep 9b:The Movie Database for TV Shows is the default scraper and is automatically selected.
* Select Choose information provider to install another scraper if required
* For the Scraper Settings, see the next section TV Show Scraper
* For the remaining settings see TV Show- Content scanning options below
- If Enabled Kodi will use the folder name to scrape the movie
- Kodi will load NFO files from NFO files named movie.nfo, but will fallback to <videofilename>.nfo as required
- Kodi will load artwork files using the short format <artworktype>.jpg/png filenames, but will fallback to the longer <NameOfVideoFile>-<artworktype>.jpg/png format as required.
- If Disabled Kodi will use the filename to scrape the movie
- NFO files must be named the long format <MovieFileName>.nfo filename.
- Artwork files must be named using the long format <NameOfVideoFile>-<artworktype>.jpg/png filenames.
- Scan Recursively
- Used for deep folder structures such as when additional Genre or Movie Set folders are used. Will allow the video scanner to search deeper to find the playable file
- Selected folder contains a single video
- Normally greyed out unless you have selected a single movie folder within an existing source. Disabled when a Source is selected. Becomes Enabled when a Movie folder is selected.
- Exclude path from library updates
- Prevents the Source from being scanned when an Update Library is running. When Enabled it will speed up the Update Library process in large libraries if the Source no longer has content added to it.
- TV Show- Content scanning options
- Selected folder contains a single TV show
- Allows you to change the Content settings for a particular TV Show without affecting the entire Source. Disabled when a Source is selected. Becomes Enabled when a TV Show folder is selected.
- Exclude path from library updates
- Prevents the Source from being scanned when an Update Library is running. When Enabled it will speed up the Update Library process in large libraries if the Source no longer has content added to it.
Alternate scrapers are available, and can be installed using the Get More button from the Choose information provider option shown in Step 9. Only change the default scraper if you have a particular reason to.
How To Disable Udp Checksum Offload In Windows Vista. The TargetOSOptimizer tool reconfigures various Windows functions to optimize the performance. Disabling \'Large Send Offload (LSO)\' Large Send Offload is a technique of improving network performance while at the same time reducing CPU overhead. Disabling checksum offload will also disable other stateless offloading including Receive Side Scaling (RSS), Receive Segment Coalescing (RSC) and Large Send Offload (LSO). Example 1: Disable TCP/IPv6 checksum offload on all network adapters then restart them. PS C: Disable-NetAdapterChecksumOffload -Name \'.' -TcpIPv6. Disable udp checksum offload windows vista. Name it DisabledComponents with a value of 1 This will disable all IPv6 components. Also uncheck the Ipv6 on the wireless adapter properties within the ncpa.cpl. As per your advice, i have tried to create DisabledComponents, but it didnt disable. TCP Checksum Offload (IPv6) UDP Checksum Offload (IPv6) Large Send Offload v2 (IPv6).
4.1 Movie Scraper
From Step 9a above select Settings to access the settings page for the scraper
- Keep original title
- Use the original (untranslated) title when downloading info for a foreign film.
- For example the movie Crouching Tiger, Hidden Dragon (2000) is the English translated title of the movie. The Original Name of the movie is 卧虎藏龙. If you prefer the English translated title, then disable the setting. If you prefer the original Chinese title then enable the setting.
- Enable fanart
- Enable this setting to download Fanart.
- Enable trailer (YouTube)
- Downloads the link to a movie trailer at YouTube. If you have local trailers, ensure this setting is disabled.
- Preferred language
- Language to use for summaries and other metadata.
- Preferred Certification Country
- Country/Nation preference for Content Advisory Ratings- eg M, MA, PG
- Default Rating from
- Choose site to download movie ratings from. Choices are TMDB and IMDB. If IMDB is selected, it becomes the default rating. TheMovieDB rating is still scraped.
- Add also IMDB ratings
- Only visible if the previous setting is set to TMDB. Allows scraping of ratings from both sources, but keeps TheMovieDB rating as the default rating.
Press OK to accept the changes. The screen in Step 10 will be offered
4.2 TV Show Scraper
From Step 9b above select Settings to access the settings page for the scraper
- Keep original title
- Use the original (untranslated) title when downloading info for a TV Show
- For example the movie Crouching Tiger, Hidden Dragon (2000) is the English translated title of the movie. The Original Name of the movie is 卧虎藏龙. If you want the English translated title, then disable the setting. If you want the original Chinese title then enable the setting.
- Get Artwork from themoviedb.org
- Enable this setting to download Poster, Fanart and episode Thumbs Artwork
- Get Extra Artwork from fanart.tv
- Enable this setting to download other Artwork types such as Banner, Clearart, Clearlogo, Discart, Landscape for the TV Show and Seasons
- Preferred language
- Language to use for summaries and other metadata.
Press OK to accept the changes. The screen in Step 10 will be offered
Step 10: Press Yes to scrape the content to the library
(if No is pressed, it can be scanned later via the Source Context Menu).
Once you press Yes, Kodi will scan your library and attempt to match each title in your library to the title at the site of the Information Provider. If a match is found, the metadata and artwork is downloaded and used for the library display. Depending upon the size of your library, this could take some time. A single movie could take approx 30 seconds, a library of 400 movies could take over an hour.
When the scraping process is complete, be sure to check the Event Log to view any titles that were not added to the library, which is normally due to incorrect naming. See.. Scraping Problems
| Return to top |
|---|
For details on the supported protocols and configuration
- See: File sharing
Follow the steps (above) for adding a source, but when you get to the \'browse\' section (step 4 & 5), you need to do one of the following:
If your remote device is visible from one of the existing choices (e.g \'Network File system\' , \'UPnP Devices\' etc)
- Select a remote location, and you should be able to browse to the remote server.
If the device is not visible, or
- It is a remote NAS
- It is an SMB server
You will need to add a new network location:
Image 1- Select Add network location.. from the Browse for new shares\' list.
Image 2- In the new window select the correct Protocol for your Network Share, then select Server Name.
Image 3- Type in either the IP Address or the Device name of your server.
Note: if you use a dynamic IP for your NAS you could lose access to your shares if the IP changes. It is recommended that you use a static IP if adding your share this way.Image 4-
4.1 In the Shared folder section, type in the name of the folder you wish to add. You will be required to add the drive letter eg f/Movies.
4.2 If your share requires a Username and Password enter them in the appropriate sections.
4.4 Select OK and your share should appear in the Browse for new share list shown in image 1
You might notice that Kodi has an \'ADD\' button in addition to a \'BROWSE\' button when you are adding a source. After you add your first location, you can add a second location (network or local. you can even mix them) and Kodi will show both folders as a single folder/source.
Kodi will also combine the subfolders within the source/locations. For example, if you had a hard drive for TV shows, but ran out of space, you could make a second hard drive with the same folder paths and Kodi would merge them together to a single directory path. Such as
Hard drive 1/TV shows/Hard drive 2/TV shows/
and the same is true for an additional nested folder with the same way:
Hard drive 1/TV shows/American Dad/Hard drive 2/TV shows/American Dad/
You could have half of a show on one hard drive, half on another, and Kodi will show it to you as if it was in a single location by using multiple locations in a single source.
Note: This only impacts the basic \'Files view\'. The default Library nodes will combine things by show even if their files are spread across multiple drives. Most users will not really benefit from using multiple paths in a single source.
Photosweeper windows.
- See: Media sources#Locking
- ↑https://github.com/xbmc/xbmc/pull/14898
| Return to top |
|---|
Retrieved from \'https://kodi.wiki/index.php?title=Adding_video_sources&oldid=164483\'
...'>Add Source Kodi Yg Masih Aktif(04.04.2020)Contents.1 IntroductionThe Source is the main folder on your hard drive which contains your collection of Movies or TV Shows or Music Videos or Music. These four classes of media cannot be mixed in the one Source. Once the Sources are set up, Kodi can perform the appropriate actions to display your media.
Install Plexus Addon On Kodi 17.3 & 17.4 Krypton-2017-plexus kodi. Here enter that kodi plexus repository url and also enter the media source name. Apa beli kirim aja nama toko n alamat klo mau yg asli beli aja situs resminya masih aktif. Buat anda yang masih bingung mencari situs yang membagikan playlist m3u kodi, berikut situs-situs yang biasa saya kunjungi untuk mencari playlist m3u adalah ini. Update m3u list 7 November 2015. Untuk saat ini saya memakai m3u list live tv sbb: M3u list yang disimpan di internet (remote path), lumayan bagus, selalu diupdate,bisa didownload.
There is no limit to the number of Sources that can be added to Kodi for each media class.This step of the guide will enable you to complete the following actions:. Adding Sources - Add the Source folder to Kodi. Set Media Type - Advise Kodi what type of media is in the Source. Scraper Settings - Advise Kodi which Information Provider (Scraper) to use and adjust the settings to your preferences. Add to Library - Scrape (import) the media into the libraryEach section is a direct continuation of the previous section, and only separated for clarity. Although the page looks complex, it is not. It is possible to perform the steps on this page in less than one minute once familiar with the process.If you have come directly to this page without following the guide and are unsure of how to set up your Sources on your computer/NAS, skip back to Naming Video Files at the start of the guide.does not work with the library features of Kodi (scanning data in like summaries and movie covers).
It is recommended that you share your media using another protocol such as SMB2 Scraper and SettingsThe default scraper used by Kodi for TV Shows is the TheMovieDB-TV Shows. Other scrapers are available and can be found by searching the Kodi site See: See:Check the settings of the scraper are configured to your preference. The default settings are usually good enough, but you may have different preferences or needs.When checking settings, ensure you access the scraper settings from the of the TV Show Source. Accessing it through the add-ons menu only adjusts the default settings, and won\'t adjust settings on the currently active sources.Note:.
TVDB was the default Kodi scraper until 19 November 2018 when the scraper changed to the current TheMovieDB-TV Shows scraper. Due to a lack of communication from the TVDB, the high level of complaints on their forum, and the sudden changes to their API, it was deemed necessary to change provider to ensure a more stable user experience. Enable the setting in Settings Media Videos. This will make it easier to find tv shows in your library that failed the scraping process.3 Adding Sources. Keep original title Use the original (untranslated) title when downloading info for a foreign film. For example the movie is the English translated title of the movie.
The Original Name of the movie is 卧虎藏龙. If you prefer the English translated title, then disable the setting. If you prefer the original Chinese title then enable the setting. Enable fanart Enable this setting to download.
Enable trailer (YouTube) Downloads the link to a movie trailer at. If you have local trailers, ensure this setting is disabled. Preferred language Language to use for summaries and other metadata. Preferred Certification Country Country/Nation preference for Content Advisory Ratings- eg M, MA, PG Default Rating from Choose site to download movie ratings from.
Choices are TMDB and IMDB. If IMDB is selected, it becomes the default rating. TheMovieDB rating is still scraped. Add also IMDB ratings Only visible if the previous setting is set to TMDB. Allows scraping of ratings from both sources, but keeps TheMovieDB rating as the default rating.Press OK to accept the changes. The screen in Step 10 will be offered4.2 TV Show Scraper. Keep original title Use the original (untranslated) title when downloading info for a TV Show For example the movie is the English translated title of the movie.
The Original Name of the movie is 卧虎藏龙. If you want the English translated title, then disable the setting.
If you want the original Chinese title then enable the setting. Get Artwork from themoviedb.org Enable this setting to download Poster, Fanart and episode Thumbs Get Extra Artwork from fanart.tv Enable this setting to download other types such as Banner, Clearart, Clearlogo, Discart, Landscape for the TV Show and Seasons Preferred language Language to use for summaries and other metadata.Press OK to accept the changes. The screen in Step 10 will be offered5 Add to Library. Step 10: Press Yes to scrape the content to the library(if No is pressed, it can be scanned later via the Source Context Menu).Once you press Yes, Kodi will scan your library and attempt to match each title in your library to the title at the site of the Information Provider. If a match is found, the metadata and artwork is downloaded and used for the library display. Depending upon the size of your library, this could take some time. A single movie could take approx 30 seconds, a library of 400 movies could take over an hour.When the scraping process is complete, be sure to check the to view any titles that were not added to the library, which is normally due to incorrect naming.
See.At this point, you should now have a fully functioning video library. You might notice that Kodi has an \'ADD\' button in addition to a \'BROWSE\' button when you are adding a source. After you add your first location, you can add a second location (network or local. You can even mix them) and Kodi will show both folders as a single folder/source.Kodi will also combine the subfolders within the source/locations. For example, if you had a hard drive for TV shows, but ran out of space, you could make a second hard drive with the same folder paths and Kodi would merge them together to a single directory path.
Such asHard drive 1/TV shows/ Hard drive 2/TV shows/and the same is true for an additional nested folder with the same way:Hard drive 1/TV shows/American Dad/ Hard drive 2/TV shows/American Dad/You could have half of a show on one hard drive, half on another, and Kodi will show it to you as if it was in a single location by using multiple locations in a single source.Note: This only impacts the basic \'Files view\'. The default Library nodes will combine things by show even if their files are spread across multiple drives. Most users will not really benefit from using multiple paths in a single source.8 Password protected sources See:9 References.
| Steps to create your Video Library |
|---|
| 1. Video Guide Main Page |
| Prepare the Files |
2. Naming & Folder Structure
|
| Creating the Library |
| 3. Add Sources & Scrape |
| 4. Scraping Problems |
| Modify your Library |
| 5. Update Video Library |
| 6. Library Management |
7. Artwork
|
8. NFO Files
|
| Safeguard & Rebuild |
| 9. Import-Export Library |
| 10. Backup |
| Video library | Adding video sources |
- 4Set Content
The Source is the main folder on your hard drive which contains your collection of Movies or TV Shows or Music Videos or Music. These four classes of media cannot be mixed in the one Source. Once the Sources are set up, Kodi can perform the appropriate actions to display your media. There is no limit to the number of Sources that can be added to Kodi for each media class.
This step of the guide will enable you to complete the following actions:
- Adding Sources - Add the Source folder to Kodi
- Set Media Type - Advise Kodi what type of media is in the Source
- Scraper Settings - Advise Kodi which Information Provider (Scraper) to use and adjust the settings to your preferences
- Add to Library - Scrape (import) the media into the library
Each section is a direct continuation of the previous section, and only separated for clarity. Although the page looks complex, it is not. It is possible to perform the steps on this page in less than one minute once familiar with the process.
If you have come directly to this page without following the guide and are unsure of how to set up your Sources on your computer/NAS, skip back to Naming Video Files at the start of the guide.
UPnP does not work with the library features of Kodi (scanning data in like summaries and movie covers). It is recommended that you share your media using another protocol such as SMB
The default scraper used by Kodi for TV Shows is the TheMovieDB-TV Shows. Other scrapers are available and can be found by searching the Kodi site here
- See: TheMovieDB
- See: TheMovieDB Add-on
Check the settings of the scraper are configured to your preference. The default settings are usually good enough, but you may have different preferences or needs.
When checking settings, ensure you access the scraper settings from the Context Menu of the TV Show Source. Accessing it through the add-ons menu only adjusts the default settings, and won\'t adjust settings on the currently active sources.
Note:
- TVDB was the default Kodi scraper until 19 November 2018 when the scraper changed to the current TheMovieDB-TV Shows scraper [1]. Due to a lack of communication from the TVDB, the high level of complaints on their forum, and the sudden changes to their API, it was deemed necessary to change provider to ensure a more stable user experience.
- Enable the setting Show empty TV shows in Settings > Media > Videos. This will make it easier to find tv shows in your library that failed the scraping process.
Step 1: Select VIDEOS in the home screen menu.
(Or select Enter files section if that button is visible)Step 2: Select FILES
Step 3: Select ADD VIDEOS...
Step 4: Select the BROWSE button from the ADD VIDEO SOURCE window.
Step 5: Browse to locate your Source folder and Enter that folder. Select OK
Note: Network browsing is no longer possible with Samba v2 and upwards. Samba v1 was deprecated May 2018. To add Network Sources, see Section 6- Adding Remote Sources belowStep 6: Either use the default name or rename the Source. The name doesn\'t matter to Kodi, but keep the names unique for ease of maintenance. Then select OK.
Step 7: The set content window will display. This is where the media type is set.
Select the option This directory contains.Step 8: Select the type of media that is in the Source.
The left image is the Set Content screen for Movies. The right image is the Set Content screen for TV Shows. Continue these steps using the appropriate one, not both.
Step 9a:The Movie Database for movies is the default scraper and is automatically selected.
* Select Choose information provider to install another scraper if required
* For the Scraper Settings, see the next section Movie Scraper
* For the remaining settings see Movies- Content scanning options belowStep 9b:The Movie Database for TV Shows is the default scraper and is automatically selected.
* Select Choose information provider to install another scraper if required
* For the Scraper Settings, see the next section TV Show Scraper
* For the remaining settings see TV Show- Content scanning options below
- If Enabled Kodi will use the folder name to scrape the movie
- Kodi will load NFO files from NFO files named movie.nfo, but will fallback to <videofilename>.nfo as required
- Kodi will load artwork files using the short format <artworktype>.jpg/png filenames, but will fallback to the longer <NameOfVideoFile>-<artworktype>.jpg/png format as required.
- If Disabled Kodi will use the filename to scrape the movie
- NFO files must be named the long format <MovieFileName>.nfo filename.
- Artwork files must be named using the long format <NameOfVideoFile>-<artworktype>.jpg/png filenames.
- Scan Recursively
- Used for deep folder structures such as when additional Genre or Movie Set folders are used. Will allow the video scanner to search deeper to find the playable file
- Selected folder contains a single video
- Normally greyed out unless you have selected a single movie folder within an existing source. Disabled when a Source is selected. Becomes Enabled when a Movie folder is selected.
- Exclude path from library updates
- Prevents the Source from being scanned when an Update Library is running. When Enabled it will speed up the Update Library process in large libraries if the Source no longer has content added to it.
- TV Show- Content scanning options
- Selected folder contains a single TV show
- Allows you to change the Content settings for a particular TV Show without affecting the entire Source. Disabled when a Source is selected. Becomes Enabled when a TV Show folder is selected.
- Exclude path from library updates
- Prevents the Source from being scanned when an Update Library is running. When Enabled it will speed up the Update Library process in large libraries if the Source no longer has content added to it.
Alternate scrapers are available, and can be installed using the Get More button from the Choose information provider option shown in Step 9. Only change the default scraper if you have a particular reason to.
How To Disable Udp Checksum Offload In Windows Vista. The TargetOSOptimizer tool reconfigures various Windows functions to optimize the performance. Disabling \'Large Send Offload (LSO)\' Large Send Offload is a technique of improving network performance while at the same time reducing CPU overhead. Disabling checksum offload will also disable other stateless offloading including Receive Side Scaling (RSS), Receive Segment Coalescing (RSC) and Large Send Offload (LSO). Example 1: Disable TCP/IPv6 checksum offload on all network adapters then restart them. PS C: Disable-NetAdapterChecksumOffload -Name \'.' -TcpIPv6. Disable udp checksum offload windows vista. Name it DisabledComponents with a value of 1 This will disable all IPv6 components. Also uncheck the Ipv6 on the wireless adapter properties within the ncpa.cpl. As per your advice, i have tried to create DisabledComponents, but it didnt disable. TCP Checksum Offload (IPv6) UDP Checksum Offload (IPv6) Large Send Offload v2 (IPv6).
4.1 Movie Scraper
From Step 9a above select Settings to access the settings page for the scraper
- Keep original title
- Use the original (untranslated) title when downloading info for a foreign film.
- For example the movie Crouching Tiger, Hidden Dragon (2000) is the English translated title of the movie. The Original Name of the movie is 卧虎藏龙. If you prefer the English translated title, then disable the setting. If you prefer the original Chinese title then enable the setting.
- Enable fanart
- Enable this setting to download Fanart.
- Enable trailer (YouTube)
- Downloads the link to a movie trailer at YouTube. If you have local trailers, ensure this setting is disabled.
- Preferred language
- Language to use for summaries and other metadata.
- Preferred Certification Country
- Country/Nation preference for Content Advisory Ratings- eg M, MA, PG
- Default Rating from
- Choose site to download movie ratings from. Choices are TMDB and IMDB. If IMDB is selected, it becomes the default rating. TheMovieDB rating is still scraped.
- Add also IMDB ratings
- Only visible if the previous setting is set to TMDB. Allows scraping of ratings from both sources, but keeps TheMovieDB rating as the default rating.
Press OK to accept the changes. The screen in Step 10 will be offered
4.2 TV Show Scraper
From Step 9b above select Settings to access the settings page for the scraper
- Keep original title
- Use the original (untranslated) title when downloading info for a TV Show
- For example the movie Crouching Tiger, Hidden Dragon (2000) is the English translated title of the movie. The Original Name of the movie is 卧虎藏龙. If you want the English translated title, then disable the setting. If you want the original Chinese title then enable the setting.
- Get Artwork from themoviedb.org
- Enable this setting to download Poster, Fanart and episode Thumbs Artwork
- Get Extra Artwork from fanart.tv
- Enable this setting to download other Artwork types such as Banner, Clearart, Clearlogo, Discart, Landscape for the TV Show and Seasons
- Preferred language
- Language to use for summaries and other metadata.
Press OK to accept the changes. The screen in Step 10 will be offered
Step 10: Press Yes to scrape the content to the library
(if No is pressed, it can be scanned later via the Source Context Menu).
Once you press Yes, Kodi will scan your library and attempt to match each title in your library to the title at the site of the Information Provider. If a match is found, the metadata and artwork is downloaded and used for the library display. Depending upon the size of your library, this could take some time. A single movie could take approx 30 seconds, a library of 400 movies could take over an hour.
When the scraping process is complete, be sure to check the Event Log to view any titles that were not added to the library, which is normally due to incorrect naming. See.. Scraping Problems
| Return to top |
|---|
For details on the supported protocols and configuration
- See: File sharing
Follow the steps (above) for adding a source, but when you get to the \'browse\' section (step 4 & 5), you need to do one of the following:
If your remote device is visible from one of the existing choices (e.g \'Network File system\' , \'UPnP Devices\' etc)
- Select a remote location, and you should be able to browse to the remote server.
If the device is not visible, or
- It is a remote NAS
- It is an SMB server
You will need to add a new network location:
Image 1- Select Add network location.. from the Browse for new shares\' list.
Image 2- In the new window select the correct Protocol for your Network Share, then select Server Name.
Image 3- Type in either the IP Address or the Device name of your server.
Note: if you use a dynamic IP for your NAS you could lose access to your shares if the IP changes. It is recommended that you use a static IP if adding your share this way.Image 4-
4.1 In the Shared folder section, type in the name of the folder you wish to add. You will be required to add the drive letter eg f/Movies.
4.2 If your share requires a Username and Password enter them in the appropriate sections.
4.4 Select OK and your share should appear in the Browse for new share list shown in image 1
You might notice that Kodi has an \'ADD\' button in addition to a \'BROWSE\' button when you are adding a source. After you add your first location, you can add a second location (network or local. you can even mix them) and Kodi will show both folders as a single folder/source.
Kodi will also combine the subfolders within the source/locations. For example, if you had a hard drive for TV shows, but ran out of space, you could make a second hard drive with the same folder paths and Kodi would merge them together to a single directory path. Such as
Hard drive 1/TV shows/Hard drive 2/TV shows/
and the same is true for an additional nested folder with the same way:
Hard drive 1/TV shows/American Dad/Hard drive 2/TV shows/American Dad/
You could have half of a show on one hard drive, half on another, and Kodi will show it to you as if it was in a single location by using multiple locations in a single source.
Note: This only impacts the basic \'Files view\'. The default Library nodes will combine things by show even if their files are spread across multiple drives. Most users will not really benefit from using multiple paths in a single source.
Photosweeper windows.
- See: Media sources#Locking
- ↑https://github.com/xbmc/xbmc/pull/14898
| Return to top |
|---|
Retrieved from \'https://kodi.wiki/index.php?title=Adding_video_sources&oldid=164483\'
...'>Add Source Kodi Yg Masih Aktif(04.04.2020)© 2020 Add Source Kodi Yg Masih Aktif.